TRIPLEAT CURTAINS

The name "Tripleat Curtains" comes from the main feature of these classic curtains, which are the three folds at the top.

TRIPLEAT CURTAINS

This curtain is manufactured with a special rope that measures 12cm high and is manufactured with a ratio of 3 meters of fabric for each meter of rail. This amount of fabric gives the curtain a good drape. The fabric is hung from the rail using grappling hooks. An advantage of this type of classic curtains compared to the Onda Serena is that it requires less installation space, because while a Onda Serena at 2.8 requires 13cm, this curtain requires 7.5cm, for which in addition to the design, it is recommended for reduced spaces of facility and for hotels.

TRIPLEAT CURTAINS

Features

Drive: string, baton or motorized. Maximum width: 11.80m (at the ends or in the center) / 7m to one side. Maximum height: 4.00m motorized or with rope / 3.20m manual with pole. Intermediate junction: after 5.80m wide. Distance between presses with the rope collected: 11cm. Pickup types: right, left, let's enter and center. Curved Rail: if applicable. 90 degree angle: if applicable. Motorization: if applicable (110v wired or RF motors).